aso series ? mini-sip ssr ? ratings to 2a @ 280 vac ? scr output ? dc control ? zero-crossing (resistive loads) or random-fire (inductive loads) output product selection control voltage 1.5a 2a 4-10 vdc aso241 aso242 available options output specifications (1) description aso241 aso242 operating voltage (47-63hz) [vrms] 12-280 12-280 transient overvoltage [vpk] 600 600 maximum off-state leakage current @ rated voltage [marms] 0.1 0.1 minimum off-state dv/dt @ maximum rated voltage [v/sec] (3) 500 500 maximum load current [arms](3) 1.5 2.0 minimum load current [arms] 0.025 0.06 maximum surge current (16.6ms) [apk] 40 120 maximum on-state voltage drop @ rated current [vpk] 1.5 1.5 minimum power factor (with maximum load) 0.5 0.5 input specifications (1) description parameters control voltage range 4-10 vdc must turn on voltage 4.0 vdc must turn off voltage 1.0 vdc typical input current @ 5 vdc 15 madc nominal input impedance 300 ohm maximum turn-on time [msec] 1/2 cycle maximum turn-off time [msec] 1/2 cycle
general specifications description parameters dielectric strength, inpu t/output/base (50/60hz)(2) 2500 vrms minimum insulation resistance (@ 500 vdc)(2) 10 9 ohm maximum capacitance, input/output 8.0 pf ambient operating temperature range -30 to 80 ? c ambient storage temperature range -30 to 125 ? c weight (typical) 0.15 oz. (4.3g) encapsulation thermally conductive epoxy general notes 1) all parameters at 25c unless otherwise specified. 2) dielectric and insulation resistence are measured between input and output 3) off-state dv/dt test method per eia/narm standard rs-443 wiring diagram mechanical specifications
thermal derate information agency approvals e116950 lr81689 rev. 112911
annex - enviromental information
|